| Problem | Cause | Treatment | Preventative Maintenance |
|---|---|---|---|
Yellow/Orange spots on walls, etc | Mustard algae | Use Algaecide 60 and check pH. | Maintain pH (7.2-7.6) range. Treat weekly with Super Shock. |
| Iron in water | Use Metal Out to remove iron stains. | Add Metal Out periodically. | |
| Cloudy green water | Green algae | Use Algaecide 60. | Add Algaecide 60: 2 to 4 ounces per 10,000 gallons. Every 5-7 days after initial treatment. |
| Copper or iron dissolved in water | Check pH, use Metal Out to remove iron stains. | Add Metal Out, make sure pH is balanced before adding. | |
| Brown/Reddish water, brown stain | Corrosion of metal pool hardware due to low pH | Adjust pH to 7.2 to 7.6 by adding pH Plus. Use Metal Out. | Add Alkalinity Control weekly to prevent pH swings. |
| Iron or manganese | Adjust with Metal Out. | Treat with Metal Out periodically. | |
| High pH & Total Alkalinity | Lower to proper range with pH Minus. | Test daily, add Alkalinity Control to prevent pH swings. | |
| Clear green water | Corrosion of copper/metal pipes and pool equipment | Adjust pH to 7.2 to 7.6 by adding pH Plus. | Add Alkalinity Control weekly to prevent pH swings. |
| Dissolved copper or iron from fill water | Treat with Metal Out. | Treat with Metal Out periodically. | |
| Very high pH and Total Alkalinity | Correct with pH Minus. | Test daily and adjust to maintain pH at 7.2-7.6 and Total Alkalinity at 75-120 ppm, add Alkalinity Control. | |
| Cloudy water | Filter not removing small particles | Treat with Ultra Blue Clarifier. | Use weekly dosage of Ultra Blue Clarifier. Clean filter weekly. |
| Free Chlorine residual too low | Shock with Super Shock. | Maintain Free Chlorine level at 1-3 ppm at all times regardless of pool usage or weather conditions. Shock every other week with Super Shock. | |
| Inadequate filtration | Clean filter with TSP or Filter Cleaner. | Use Ultra Blue Clarifier to coagulate micro particles. | |
| Rainfall | Shock treat with Super Shock to destroy dirt and/or odors. | Shock every other week with Super Shock. | |
| High pH or Total Alkalinity | Use pH Minus. | Test pH daily, treat as needed, add Alkalinity Control. | |
| Oil/Grime on tile and vinyl | Build-up of oils and lotions | Use Tile & Vinyl Brite to remove grime and restore luster. | Add Skum Remover weekly to prevent build up and improve filtration. |
| Calcium scale deposits | Hard water or high pH or Total Alkalinity | Use Metal Out and pH Minus. | Add Metal Out. Test daily and maintain pH (7.2-7.6) range. |
Chlorine odor | Combined Chlorine level too high | Shock treat with Super Shock to destroy Combined Chlorine. | Maintain disinfectant residual of 1-3 ppm at all times. Routinely shock treat with Super Shock. |
| pH too low or high | pH Plus or pH Minus. | Test daily, add Alkalinity Control. | |
| Skin/Eye irritation | Formation of Combined Chlorine in pool water | Shock treat with Super Shock to destroy Combined Chlorine. | Treat with Super Shock. Treat weekly with Skum Remover. |
| Scum along water line | Body oils, grease and dirt accumulations | Use Skum Remover and Tile & Vinyl Brite. | Maintain clean filter with periodic cleaning using Filter Cleaner. Add Skum Remover weekly to keep pool water scum free. |
